Description
The 1/4 in. Barbed Tee connects three sections of 1/4 in. supply tubing or dripline for a “T” intersection. It also connects two 1/4 in. branches to a punched hole in any size supply line. To install, insert the single-barbed tee inside the drip tubing opening and anchor in place (Tip: soften the tubing end so it’s easier to work with by soaking in hot water or leaving out in the sun for pliability.) Use fittings to set up a new drip system or expand or repair an existing system. Reusable micro fittings are made of acrylonitrile butadiene styrene (ABS).
Connect three sections of 1/4 in. supply tubing or dripline for a “T” intersection, or add two branches of 1/4 in. tubing or dripline from a 1/2 in., 5/8 in., or 0.710 in. supply line; Works in a variety of areas, from small to large, flat or sloped; tran
Fits 1/4 in. tubing or dripline with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in.
Insert barbed end into the drip tubing opening and anchor it in place. (Tip: soften the tubing end so it’s easier to work with by soaking in hot water or leaving out in the sun for pliability).; Single-barbed fitting inserts into drip tubing and anchors i
Handles water pressures up to 50 psi; Works with Raindrip products and other products with compatible connection type
1/4 in. barbed tees come in a pack of 25; Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
Reviews
There are no reviews yet.